Axium AX-800-DAV Multiroom Amplifier - COMING SOON

From the front panel touchscreen through to the switchmode power supply you can tell everything has been re-engineered.

The 6 powered zones delivering 50 watts per speaker & 2 independent preamp zones, all have access to 8 digital/analogue sources plus an internal audio decoder that can stream from a network storage

device or from a USB stick connection on the front panel.

Of course USB, RS232 and Ethernet connectivity, routed IR outputs, 2 lit doorbell compatable triggers, amp on's, individual keypad connections, a legacy keypad controller & an amplifier expansion port offering unrivalled connectivity up to 96 zones.

Some of the many Features:

• 50Watts RMS per channel 8 ohm - 4 ohm capable

• Output short cct, thermal and hard clipping protection

• 11 Sources

  - 1-6 either Analogue, or Coax Digital Audio (PCM)

  - 7-8 either Coax or Optical Digital Audio (PCM)

  - 9 is streamed from the USB Host, or Ethernet

  - 10-11 are internal Door-Bell .wav playback sources

• 10 Buffered IR Outputs. 1-8 have routing, 9-10 summed

• Zone 1-4 have a 4 source composite video switcher

• Internal real time clock

• Internal Web Page

• 96 Zones

• Backward compatable to previous generation systems

• 14 Presets command

• Extensive zone linking

• Keypad/IR connection for every zone

• USB, RS232 and Ethernet interface

• 14 amplifier presets, two page presets

• AMP-On Status: 12VDc Outputs

• Setup lockout

• Static/DHCP network connections

• Plus More

• Download AX-800DAV Cut Sheet here

Axium AX-400-DA Multiroom Amplifier - COMING SOON
Like its bigger brother the AX-400DA has been re-engineered from the ground up, including many of the features found in the AX-8000DAV.

The 4 powered zones deliver the same 50 watts per speaker that all Axium owners have come to appreciate, & with the added functionality of being able to be stacked with the AX-800DAV expansion is now even more aforadable.

Of course there is USB, RS232 & Ethernet connectivity, routed IR outputs, 2 lit doorbell compatable triggers, amp on's, individual

keypad connections, a legacy keypad connector & an amplifier expansion ort offeringunrivalled connectivity up to 96 zones.

The internal webpage has unique customosation allowing IR commands to be attached to buttons for source control from within the webpage. Add a AX-400DA to a legacy 452/4750 Axium system and enjoy webtablet & phone control of all the zones.

With adjustable input levels, more presets, wider zone linking, 2 doorbell inputs for stored music with more memory for longer playback, massively improved standby & operational efficiencies and a significant refinement in sound quality, like the AX-800DAV this is an evolutionary leap forward.

There are no more excuses... Prepare to be spellbound in every room.

Some of the many Features:

• 50Watts RMS per channel 8 ohm - 4 ohm capable

• Output short cct, thermal and hard clipping protection

  4 zones

  Bass, Treble, Balance, Loudness adjustment per zone

  6 Sources

  - 1 - 6 either Analogue, or Coax Digital Audio (PCM)

  Storage for up to 10 seconds of 44.1 KHz 16 Bit stereo

• 8 Buffered IR outputs

• Internal real time clock

• Internal Web Page

• 14 Presets command

• Extensive zone linking

• Backward compatable to previous generation systems

• USB, RS232 and Ethernet interface

• Two page presets

• AMP-On Status: 12VDc Outputs

• Setup lockout

• Static/DHCP network connections

Download AX-400-DA Cut Sheet

Axium AX-07S 7+7W Slave Amplifier

The AX-07S is a low cost solution for low power Audio zones. It is the perfect partner for Axium Multi-Zone amplifiers, where a Preamplifier Zone may be set to ‘independent mode'; In this mode the preamplifier Volume and Muting may be different to the Multi-Zone amplifiers primary speaker output.

However the AX-07S is equally a powerful standalone unit, offering 7+7Watts into 8 ohms (nearly 15Watts).

Download AX-AX07S Cut Sheet here